激光与DNA作用系统的随机共振研究

建立了激光与ＤＮＡ分子系统相互作用的Ｆｏｋｋｅｒ－Ｐｌａｎｃｋ方程，通过对该方程的数值研究，发现在绝热近似下，系统发生随机共振，噪声强度，激光振幅和频率协同作用共同制约着生物系统的演化过程，噪声强度在生物系统遗传变异过程中可能起重要作用。     

Electrochemical noise analysis for estimation of corrosion rate of carbon steel in bicarbonate solution

We have investigated the electrochemical noise behavior of carbon steel in fully deaerated aqueous bicarbonate solutions, and discussed the optimum conditions of the noise analysis for estimating corrosion rate of the steel. Noise of the potential difference and of the short-circuit current between two identical steel coupons were successfully measured. The time-series noise patterns were transformed into frequency domain by fast Fourier transformation, and then their power spectrum densities (PSDs) at a frequency were determined to be compared with the corrosion rate. The PSDs of the potential and of the current varied with changing environmental factors of bicarbonate concentration, pH, and immersion time. The factors also controlled the corrosion rate of the steel. The PSDs were associated with the corrosion rate, and then it was found that the PSDs of the potential and of the current showed linear correlation with the corrosion rate in log-log scale. There was also linear relationship between the corrosion rate and a spectral noise resistance obtained from the PSDs of the potential and the current. The linearities of the three correlations were better at a lower analyzed frequency. Furthermore, the PSDs of the current and the noise resistance indicated more linear correlation with the corrosion rate than that of the potential. As the simplicity of the measurement system is additionally considered, it is concluded that the PSD of the current noise at an analyzed frequency of 3 mHz is the optimum conditions for estimating the corrosion rate from 10⁻² to 10⁰ A m⁻² in this study.     

基于信息理论的采样成像系统优化设计方法

本文把信息论应用于采样成像系统中，用端到端的互信息量评价图像捕捉系统，研究光电一体化系统优化设计方法。模拟系统设计参数，计算机仿真分析了采样成像系统中普遍存在的欠采样噪声、光学成像系统的模糊效应以及二者之间的涨落、平衡，做出了基于互信息量的系统评价仿真曲线，提出了光学成像系统与图像捕捉系统的匹配条件和优化设计方法。     

轿车车内减振降噪控制方法的研究

本文分析了轿车车内噪声产生的机理，并对主动控制方法在汽车减振降噪领域的应用作了探讨和展望。     

补偿式光纤F—P干涉仪的信号处理系统

本文提出并研制成补偿式光纤F-P干涉仪信号处理系统,提出了用来测量微小位移信号的三种方法及电路,即透射峰时间间隔测量法、光脉冲基波幅度测量法(精密整流法)、鉴相法。测试结果表明:时间间隔测量法,它的最大灵敏度达到0.26纳米/微秒;精密整流法,最大灵敏度为2.38纳米/伏特。     

An efficient controller structure with minimum roundoff noise gain

Based on a polynomial operator approach, a new sparse controller structure is derived, which is actually an improved version of the recently proposed structure [Li, G. (2004). A polynomial-operator-based DFIIt structure for IIR filters. IEEE Transactions on Circuits and Systems II, 51, 147-151]. The performance of the proposed structure is analyzed by deriving the corresponding expression of roundoff noise gain and the problem of finding optimized sparse structures is solved efficiently with a genetic algorithm (GA). A numerical example is given, which shows that the newly developed structure can achieve much better performance than some well-known structures and particularly outperforms the traditional optimal fully parametrized realization greatly in terms of reducing roundoff noise and implementation complexity.     

兴安岭山地低信噪比地震资料处理技术分析

大、小兴安岭山地地表大多被火山岩、火山岩风化形成的残余物和腐植土所覆盖，地震资料中普遍存在较强的折射波和多次折射波，资料的信噪比很低；此外，该区低、降速层厚度和速度横向变化剧烈，静校正问题突出，为此，开展了有针对性的处理方法研究。针对山地地表起伏大的特点，采用了浮动基准面方法；针对低、降速层厚度和速度横向变化剧烈的特点，采用了折射静校正和微测井静校正相结合的方法；针对折射波强的特点，采用了t—x域叠前相干压制方法；针对叠加剖面随机噪声严重的特点，采用了f—x域随机噪声衰减方法。实际资料处理表明，采用上述处理手段，提高了资料的信噪比，增强了同相轴的连续性，突出了反射波组特征。     

基于智能模糊控制策略的有源消声

有源消声是一种有效的低频噪声控制方法，由于空间有源消声过程具有时变性和非线性，传统的自适应算法不能进行很有效的控制。本文采用智能模糊控制策略，建立了基于智能模糊控制策略的有源消声系统，通过实验与传统自适应控制算法的消声效果作对比分析，证明智能模糊控制器不但控制速度快，易于实现，而且消声效果明显优于后者，具有较大的应用推广价值。     

高帧速摄像器

本文介绍了高帧速摄像器的设计、制造、工作和性能。该高帧速有３６０×３６０像素、摄像速度高达５×１０５帧／秒，该摄像器读出电路类似于帧转移ＣＣＤ，由四部分组成     

ZS1756振动筛动态分析

应用ＳＡＰ５Ｐ软件计算矿用振动筛前４０阶固有模态，从提高寿命观点看，第１阶，第３－４阶和第６阶模态应采取抑制措施；从队噪观点看，前６阶模态应给予注意。